TH35-140 Telehandler Forklift

·Boom
The loading position of the boom is lower than the operator’s vision, which offers better visibility.
The boom designing and the robot welding provide safety operation.
The nylon pads are wear-resistant and allow easy access to check and maintain the machine.
An 140l/min piston variable displacement pump enables the boom to hoist, extend and retract at fast speed for quick cycling.
Cone sealing surface can ensure the reliability and safety at the highest levels. Besides, that oil pipes for working device inbuilt of boom makes the machine safe and nice looking.

·Cab
The 1.65m cab height can make the operator feel more comfortable. ROPS/FOPS certified, the wide glass can give a better vision. ISO device can insulate noise and soften the vibration while working. This machine is fixed with an adjustable suspending seat to provide the operator with comfortable working condition.
The controllability of the machine is improved by a proportional single-lever multi-function joy-stick, a large diameter steering wheel and an integrated dashboard, with gauge readout for easy monitoring. The powerful heating/cooling system has function of adjusting the temperature inside cabin and offers a maximum human comfort under any wheather condition.

·Size
This machine is 2.49m wide and 2.62m high to reach a great maneuverability in applications and an artistic standard.
The excellent weight/power ratio is an ideal proportion for working at construction site and mining field.

·Transmission
Two-speed hydrostatic transmission allows fast transferring both on road and on working spot. In addition, wheel speed driven by hydraulic motor is infinitely variable. Fast transferring at speed up to 35km/h with traction force of 5000 daN and at gradeability of 60 percent is also available. The front and rear differential axles with limited tilting ensure the powerful traction even on a bumpy mud road.
Small turning radius combined with 3 types of steering mode provides perfect maneuverability. And oil bath multidisc brakes promise safety braking of machine under any operation. All hydraulic pumps, motors and electric control valves are supplied by the world famous products from Rexroth of Bosch Group

·Chassis
The chassis with Integration board design plates of 22mm thickness to reinforce the chassis to upgrade the maximum flexibility to resist the force of twisting and deflection and increase durability.

·Engine
4 cylinders turbocharged, water cooling. The 101HP turbocharging diesel engine conform to the low excretion standard (UE 97/68-TIER) has the redundant reliability.
Under any operating mode low fuel oil consumption and slow-speed of revolution high torque. When 2200 rpm power 74.5kw.

Main Parameters:

Lifting Capacity: 3,500KG
Max. Lifting Height: 13,650MM
Tipping Load At Max. Outreach: 1,430KG

Lift Time-No Load: 16S
Lower Time-No Load: 12S
Telescope In, Time At Max. Reach-No Reach: 17S
Telescope In, Time At Max. Height-No Reach: 16S
Telescope Out, Time At Max. Reach-No Reach: 22S
Telescope Out, Time At Max. Height-No Reach: 24S

Engine Model: Perkins 1104C-44T
Engine Power: 74.5KW
Max. Torque: 412Nm@1400RPM

Transmission: Hydrostatic
No. of speed: 2/2
Max. Travel Speed: 35KM/H
Max. Gradeability: 60%

Hydraulic System
Pistons Pump With Capacity At Max. Speed: 140L/Min
Max. Working Pressure: 265Bar
Control Valve With Joystick: 4 in 1

Hydraulic Oil: 183L
Fuel tank: 117L
Engine Oil: 12L

Weight Unladen(with fork): 10,650KG
Ground Clearance: 450MM
Turning Radius: 4,200MM
Drawbar Pull: 5,000daN

Tyre: 405/70-24

Fork Length: 1,200MM
Fork Width X Thickness: 120 X 45
Max. Distance Between Forks: 1,040MM
Carriage Rotation: 124MM

Oil Bath Multidisc Brakes On The Front And Rear Axles